Prusa Mendel i2 RepRap HQ 3D Printer Complete Kit Universal Desktop
Description:
Prusa Mendel Iteration 2 is a simpler remix of normal Mendel.It is
an improvement of the Prusa Mendel
(iteration 1), and was released in November 2011.
The following is a list of the main improvements made on the
original Prusa:
1. More parts are made to be push-fit
2. The carriages accommodate bushings and linear bearings
3. Nut traps were added to parts that were attached with M3 screws
(e.g. endstop holders etc.)
4. The second bed plate was removed (The PCB heatbed is the second
plate)
5. The belts were changed to GT5 belts - it is recommended to buy
professional belt pulleys
6. Most M4 screws were changed to M3s
7. A printed plastic belt guide was designed to replace the large
M8x30 fender washers
8. The belt clamp was redesigned
Features:
1.Printing area:200x200x100mm
2.New designed hotend version 2.0 with 2pcs 0.35mm nozzle,easy to
disassemble and clean.
3.Perfect extruder with more durable X-carriage printed from 3mm
ABS filament.
4.Universal Arylic controller board support plate makes your
controller board selectable.Melzi Ardentissimo
,Teensylu 0.7,Sanguinololu v1.3a,Ramps 1.4,Generation 6,
Printerboard rev D,Brainwave and Azteeg X1
to choose from.
5.Come with super smooth Borosilicate glass,easy to remove printing
parts,print toys with flat bottom.
6.New stepper motors Nema17,large torque to print smoothly,avoid
mistakes caused by friction.
7.Ultra smooth Z movement and couplings with revised X-end-idler.
8. Power supply S-350-12 12V 29A DC included.
PRINTING:
Print Technology: Fused Filament Fabrication(FFF)
Layer Resolution: 0.3mm, [0.0118 in]
Positioning Precision: 0.3mm, [0.0118 in]
Filament Type:ABS/ PLA (ABS used only when hot bed is equipped)
Filament Diameter: 1.75 mm [0.069 in], 3mm [0.118 in]
Nozzle Diameter: 0.3mm [ 0.0112 in], 0.35mm [0.013 in], 0.4 mm
[0.015 in], 0.5mm [ 0.019 in]
MECHANICAL:
Body: threaded rod + Acrylic plate
Build Platform: Borosilicate glass + Aluminium plate
SOFTWARE:
Software: Repetier-Host,Printrun
File Types: .stl
Supports: Windows/Mac/Linux
TEMPERATURE:
Max Heated Bed Temp: about 110 ℃ [230°F]
Max Extruder Temp: about 240 ℃ [464° F]
Competitive Advantages:
1. Convenient & Friendly Customer Service.
2. Low Prices Direct From Factory Suppliers.
3. Fast Delivery Around the World.
4. High Quality With Global Standards.
5. High Quality With Global Standards.
6. 1 Year Factory Warranty.6. Safe Shipping Way and Payment
Warm Note:
Welcome ODM/OEM orders we are professional to
improve,design,process,manufacture products
according to your requirement .
PHOTOS:
