STM32F401 CCU6 STM32 F4 STM32F4 Development Board For Arduino
Description
1. In the F401 series, the chip is the cheapest, even cheaper than
some F1, and crushed F1 on the main frequency, and has a
floating-point arithmetic module, the IO port contains all the
basic functions.
2. Therefore, it is possible to provide a learning platform with a
very high cost performance for beginners. In practical
applications, it is not because the computing power is
insufficient, and the IO port is incomplete and hinders
development.
3. The GND is changed to 5V B9 5V GND, which can directly connect a
small steering gear without additional wiring and reduce
development time.
Features:
1. 84Mhz Freq,64KB RAM, 256KB ROM, 36 I/0 MAX
2. 25MHZ high-speed crystal & 32.768Khz 6PF low-speed crystal
3. Flash pads have been reserved to provide USB DiSk && FATFFS
routines
4. The internal 10K resistor of BOOT is pulled down. Press the BOOT
key to enter the ISP mode.
5. Factory-programmed breathing light & USBCDC test procedure
Product Features
| Product | Product Name | STM32F401CCU6 STM32F4 Minimum Board |
| Low speed crystal oscillator | 32.768k |
| Weight | 44g |
| Product size | 52 * 21mm |
| Place of Origin | Guangdong, China |
| High speed crystal oscillator | 25MHZ |
Product Pictures
About our company
2005, Established in Shenzhen, Guangdong, China, engaged in
providing all kinds of diode, audino, integrated circuits, and
electronic components.
2006-2008, Invested in Single Chip Microcomputer plant, specialized
in manufacturing all kinds of sensor modules and power supply
modules.
2009-2010, Started to manufacture Arduno-related modules, sensor
modules, single development boards, etc.
2011-2012, Mainly provided various kinds of Arduno-related boards
and shields, such as UNO R3, Mega, DUE, W5100 etc. At the same
time, invested in the factory of 3D printer spare parts.
2013-2014, Took Arduno supplies as leading business,Cooperating
with DIY factory, providing Ardu-related Robot products such as
servo, control board cables and so on.
2015, Striving to develop overseas business, lower, accepting small
batch orders. Investing in 3D printer factory and expanding product
offerings.
FAQ
1. What is the terms of payment?
L/C,D/A,D/P,T/T,Western Union,MoneyGram
2. What is the delivery time?
Normally, 1-5 workdays after payment;
Special requirement orders, delivery time is negotiable.
3.If the products can't work after receiving it,what should I do?
We will replace new items for you at once, and respect your final
decision for wrong goods.
4.If the products don't meet my demand after I received it,can I
return it?
Yes,no problem.You can return back to us, we will refund your full
payment.
5.what is the warranty?
1-2 years warranty according to different products.
1-3 months to replace new items for free.
All products are tested strictly for 2-3 times before leaving
factory. we have earned very good reputation in quality,Certified
by the ISO9001.
