Board for Arduino Funduino UNO R3 100% Factory Price with USB Cable
Description:
Funduino UNO R3 launched an easy way to use open-source controller
hardware and UNO for Ardui with no major changes. The biggest
difference is that the USB to serial part of the circuit switch is
a ATMega16U2 microcontroller, which the cost increase, but the
software part is the same as before.
Specifications:
1. Pin changes plus two I2C pins (SDA and SCL: next to the AREF
pin, the Analog 4 and 5 copy, not the additional I2C interface),
addedtwo pins, the RESET next one is IOREF, , allowing the
expansion board to adapt to on-board voltage, this pin is just told
to expandthe board's current on-board voltage (such as UNO is 5V,
the power supply pin can be seen as copy, does not provide the
level pull-up), and the other is after inactive placeholder pins.
2. more stable RESET circuit. RESET key position has changed, be
moved close to the USB interface board corner, more convenient to
press.
3. ATmega16U2 to replace a 8U2, this does not mean a 16K flash R3
to make your code run faster, this update for the USB interface
chip, in theory, it allows the UNO can emulate USB the HID, such as
the MIDI / Joystick / Keyboard.
Features:
| Operating Voltage | 5V |
| Controller | ATmega328P-PU |
| USB to serial chip | Atmega16U2 |
| Input Voltage (recommended) | 7-12V |
| Input Voltage (limits) | 6-20V |
| Digital IO pins | 14 (of which 6 provide PWM output) |
| Analog input pins | 6 |
| DC Current per I/O Pin | 40 mA |
| USB Port | type B USB |
| Clock Speed | 16 MHz |
| PWM channel | 6 |
| Pack Size | 10cm*10cm*5cm |
| Uno R3 Board Weight | 32g |
| Cable Weight | 25g (Length: 62cm) |
| Pack List | 1* Uno R3 , 1*Cable |
Photos:
Competitive Advantage:
1.Convenient & Friendly Customer Service
2. Low Prices Direct From Factory Suppliers
3. High Quality With Global Standards.
4. 3 year factory warranty
5. Safe shipping way and payment.
